Advantages
- High sag resistance
- Tile-on-tile application possible
- Suitable for use in damp rooms
- Classification D2TE
Application
Ardabond Power is suitable for bonding ceramic wall tiles up to 30x30 cm.
Processing
Substrate: Surfaces must be dry, remain dry, clean, dust- and grease-free. The substrate must be pressure-, shape-, and tensile-resistant and stay that way. Unevenness greater than 3 mm must be leveled. Gypsum-based and highly absorbent substrates may contain a maximum of 2% moisture and should be primed with Ardagrip Classic. Old tiled walls can also be used as substrates. Clean old tiles with ArdaCleaner and prime with Ardagrip Xpress afterwards.
Application: Do not apply Ardabond Power at ambient and substrate temperatures below +5°C. Apply the adhesive with a notched trowel. Press the tile into the adhesive ridges with a sliding motion within 30 minutes. Choose the notch depth so that at least 65% of the tile's back is covered with adhesive. When bonding on porous walls, grouting can start after at least 24 hours. Longer drying time may be necessary on non-porous substrates.
Cleaning tools: Remove adhesive residues immediately and clean tools with water.
detail.eanLabel | 8713572032806 |
---|---|
Brand: | Bostik |
Ardabond Power
Bostik ArdaBond Power is a ready-to-use dispersion adhesive. It offers good initial tack and high sag resistance. The adhesive combines easy workability with excellent stability, allowing you to bond more square meters with less effort. Thanks to the addition of synthetic polymers, ArdaBond Power is especially suitable for large-scale tiling projects. It is versatile and easy to apply, reducing physical strain.
Properties
- Ready-to-use
- Elastic
- Long open time of 30 minutes
Storage and Stability
Store in a cool, dry place (around 15°C). Shelf life of at least 12 months if unopened and stored cool.