Advantages
- Shrink-free
- Low stress
- Very fine texture
- Does not powder on highly porous substrates
- Very easy to apply
- Easy to sand
- Excellent adhesion
Application
Stucco W-26 is suitable for leveling interior walls and ceilings before wallpapering, painting, or further finishing. It is also suitable for filling cracks and holes and anchoring electrical boxes and junction boxes. Because the product does not shrink (even when filling large holes), one application is sufficient. Stucco W-26 is also suitable for bonding gypsum blocks, aerated concrete blocks, gypsum ornaments, and similar materials.
Application instructions
Pour the required amount of clean cold water into a clean mixing bucket. Approximately 2.6 liters of water per 5 kg powder and about 9.1 liters per 17.5 kg powder. Gradually add Stucco W-26 while mixing until a homogeneous mass is formed. It is recommended to allow a “ripening time” of 2 minutes, then mix briefly again. Use the mixture within 60 minutes and allow it to dry. In most cases, sanding is not necessary. Small imperfections can be easily removed with a damp sponge before final curing. After curing, remaining imperfections can be removed by sanding.
detail.eanLabel | 8713572041013 |
---|---|
Brand: | Bostik |
Stucco W-26
Bostik Stucco W-26 is a gypsum-based wall leveling compound enriched with synthetic resin, featuring a very fine texture. Suitable for leveling interior walls and ceilings before wallpapering, painting, or further finishing. Also suitable for filling cracks and holes, anchoring electrical boxes and junction boxes, and bonding gypsum blocks, aerated concrete blocks, gypsum ornaments, etc.
Properties
- Can be applied up to 10 mm
- Meets classification Q1-Q4
- Enriched with synthetic resins
Storage and Stability
Store in a cool, dry place. Shelf life 12 months.